Blog · page 83

Paint Reviews, Guides, and Color 1,152 articles, every pick with a real con.

Independent paint and tool round-ups, project step-by-steps, color references and brand reviews. Every product pick lists a real weakness. No review without one.

TSP vs Degreaser: Which Pre-Paint Cleaner Wins?Comparison

TSP vs Degreaser: Which Pre-Paint Cleaner Wins?

TSP de-glosses and cleans in one step but is phosphate-banned in many states. Degreaser cleans only. Pick by surface, sheen, and zip code.

June 1, 2026
Urethane vs Acrylic Enamel: Which Wins on Trim?Comparison

Urethane vs Acrylic Enamel: Which Wins on Trim?

Urethane cures harder and yellows slightly. Acrylic is faster and water-clear. A jobsite verdict on which goes where, with a winner per dimension.

June 1, 2026
How to Paint Over Grease Stains in a KitchenFix

How to Paint Over Grease Stains in a Kitchen

Cooking grease and tar near the range eats fresh paint within months. Degrease with Krud Kutter or TSP-PF, scuff sand, then BIN or Stix primer before topcoat.

June 1, 2026
How to Block Nicotine Stains Before PaintingFix

How to Block Nicotine Stains Before Painting

Nicotine stains bleed through latex and even alkyd primer. TSP wash first, then BIN shellac primer in one or two thin coats, then your topcoat. Here's the only sequence that holds.

June 1, 2026
How to Block Rust Stains Before PaintingFix

How to Block Rust Stains Before Painting

Rust ghosts through latex and oil primer alike. Find the iron source, treat it with a converter, then seal with BIN shellac. Two topcoats and the stain stays buried.

June 1, 2026
How to Stop Condensation on Interior WallsFix

How to Stop Condensation on Interior Walls

Cold-bridge corners, north-facing exterior walls, the patch behind the dresser. Diagnose ventilation and insulation first. Anti-condensation paint is a palliative, not a cure.

June 1, 2026
How to Fix Cracking Caulk Before PaintingFix

How to Fix Cracking Caulk Before Painting

Hairline cracks in trim caulk read worse after repainting if you skip the recaulk step. Cut out the old bead, prime if oil-based residue, recaulk with a high-flex paintable, two coats topcoat.

June 1, 2026
How to Fix Damp Walls and Stop Them Coming BackFix

How to Fix Damp Walls and Stop Them Coming Back

Damp walls are a water problem in a paint costume. Diagnose the source — leak, exterior intrusion, or condensation — fix it, then seal and repaint. The order matters.

June 1, 2026
How to Fix Efflorescence on BrickFix

How to Fix Efflorescence on Brick

White crystalline bloom on brick is salts pushed to the surface by moisture. Diagnose the water source first, dry-brush, acid-wash 1:10, then Loxon-prime so paint actually holds.

June 1, 2026
How to Fix Nail Pops in DrywallFix

How to Fix Nail Pops in Drywall

Nail pops come back unless you drive a screw beside the old fastener, scrape the popped head, and refill with setting compound. Two feathered passes, then texture, then paint.

June 1, 2026
How to Paint Over a Glossy FinishFix

How to Paint Over a Glossy Finish

Glossy trim and furniture reject latex unless you break the sheen first. Sand to 220 or wipe with Krud Kutter Gloss-Off, prime with Stix, then topcoat with a waterborne urethane.

June 1, 2026
How to Fix Peeling Interior PaintFix

How to Fix Peeling Interior Paint

Three reasons interior paint peels — bathroom humidity, kitchen grease, latex rolled over oil without bonding. Diagnose the pattern, then Cover Stain or BIN before you recoat.

June 1, 2026