Paint reviews, guides, and color
Independent paint and tool round-ups. Project step-by-steps. Color references and brand reviews. Every product pick lists a real con — no review without a real weakness.
Freezer Floor Coating: Cold-Storage Specifier's Guide (2026)
Freezer floor coating systems compared by DFT, thermal-shock rating, and cure-at-temperature. Urethane cement vs MMA, USDA prep, and the install timing that holds at minus 20 degrees.
Galvanized Primer for Steel: Specifier's Guide (2026)
Galvanized primer systems compared by adhesion, DFT, and VOC. SSPC-SP1 and brush-blast prep, the white-rust problem, ASTM D6386, and the contractor path that stops paint peeling off zinc.
Commercial Garage Floor Coatings: Specifier's Guide (2026)
Commercial garage floor coatings compared by DFT, hot-tire resistance, and service life. ICRI CSP prep, MVE limits, fuel and chloride resistance, contractor path.
Gym Floor Paint: Specifier's Guide for Wood and Concrete Courts (2026)
Gym floor paint compared by DFT, slip resistance, and game-line durability. Wood-court polyurethane vs concrete epoxy, MFMA prep, and the contractor path that survives a season.
Handicap Stencil Paint: ADA Accessible Parking Specifier's Guide (2026)
Handicap stencil paint specs for ADA accessible parking: blue and white waterborne acrylic by DFT, MUTCD color compliance, ADA section 502 layout, and the contractor path on asphalt and concrete.
Hangar Floor Paint: Coatings and Safety Striping Specifier's Guide (2026)
Hangar floor paint specified by DFT, fuel and Skydrol resistance, and FAA AC 150 line layout. Epoxy and polyaspartic systems, MVE limits, and the contractor path that survives jet traffic.
High-Temp 1200F Paint for Stacks and Process Equipment: Specifier's Guide (2026)
High temp 1200F paint specified for stacks, exhaust, and process steel. Silicone DFT, SSPC-SP prep, cure schedule, CUI failure modes, and the contractor path.
High-Temp 2000F Paint for Stacks and Furnaces: Specifier's Guide (2026)
High temp 2000F paint compared for exhaust stacks, kilns, and flares. DFT, ASTM standards, silicone vs inorganic chemistry, surface prep, cure schedules, and contractor path.
200F High-Temp Paint: Heat-Resistant Coatings Specifier's Guide (2026)
200F high-temp paint compared by DFT, service temp, and substrate prep. Silicone-modified alkyd vs acrylic vs epoxy for boiler rooms, exhaust runs, and steam pipe, with the SSPC prep spec that decides service life.
High-Temp Paint for the 500F Class: Specifier's Guide (2026)
High temp paint for the 500F class compared by chemistry, DFT, and substrate prep. Silicone-alkyd, modified silicone, and inorganic zinc systems for stacks, piping, and boilers.
HVAC Duct Paint: Specifier's Guide for Galvanized Ductwork (2026)
HVAC duct paint compared by DFT, anti-condensation rating, and adhesion over galvanized steel. Self-etching primers, anti-sweat coatings, washdown topcoats, and the contractor path.
Intumescent Steel Coatings: Specifier's Guide for 2026
Intumescent paint for structural steel compared by hourly rating and W/D ratio. Thin-film waterborne vs epoxy, DFT schedules, UL 263, ASTM E119, and the contractor path.